Broadband-Hamnet™ Forum
Welcome Guest   [Register]  [Login]
«StartPrev61626364656667686970NextEnd»
 Subject :Re:Node-Node Message Transfer and WL2K.. 2015-05-20- 10:15:05 
w4rss
Member
Joined: 2013-11-27- 15:56:35
Posts: 13
Location
Forum : East/Central IN
Topic : Node-Node Message Transfer and WL2K

This seems to be the answer I've been looking for. We've been trying to get the new "PO" option to work with our Mesh system. We've been able to use the Telnet P2P over an internet router using addy's in the 192.168 realm. Can't figure out how to telnet over a mesh network, however. So, it's good to hear that RMS Relay will work on MESH. Now to figure out how. Dick W4RSS
IP Logged
 Subject :Re:Tunnel and port forwarding.. 2015-05-19- 18:42:14 
AB9U
Member
Joined: 2012-03-06- 08:19:44
Posts: 39
Location: Cottonwood, AZ
 
Forum : General
Topic : Tunnel and port forwarding

I've recently tested FTP, POP3, IMAP, SMTP across the mesh and they all do work but I found you have to be really careful to make sure every ethernet port has the right IP ports opened, such as 21, 25, etc. I made my tests ONLY using LAN ports on the router. Also, in Windoze, for Filezilla to work, I had to open ports 21 AND 20. Port 21 alone would not work right. Using Filezilla I'd get a connection and then a timeout. Once I opened that second port I could use the ftp function in different browsers and navigate among any folders I saw, open them, read them, copy files... all of it worked. Also in Winodoze, turning off the Firewall made everything work immediately. Then by closing it and opening the ports one by one I found the port 21 quirk. Now the firewall is all closed tight and it all still works. Hope this helps.
IP Logged
de Wil - AB9U
 Subject :Re:Get Involved!.. 2015-05-19- 18:22:04 
AB9U
Member
Joined: 2012-03-06- 08:19:44
Posts: 39
Location: Cottonwood, AZ
 
Forum : Phoenix
Topic : Get Involved!

Hello Patrick. I owe you an apology. The antennas I suggested are crap. Sorry about that but they are not my design. A much better yagi is the one sold by MFJ. Have a look at http://www.mfjenterprises.com/Product.php?productid=MFJ-1800. Also, since you have a GS model, have you considered tunneling yet? 73 - Wil.
IP Logged
de Wil - AB9U
 Subject :Re:Get Involved!.. 2015-05-19- 18:21:49 
AB9U
Member
Joined: 2012-03-06- 08:19:44
Posts: 39
Location: Cottonwood, AZ
 
Forum : Phoenix
Topic : Get Involved!

Hello Patrick. I owe you an apology. The antennas I suggested are crap. Sorry about that but they are not my design. A much better yagi is the one sold by MFJ. Have a look at http://www.mfjenterprises.com/Product.php?productid=MFJ-1800. Also, since you have a GS model, have you considered tunneling yet? 73 - Wil.
IP Logged
de Wil - AB9U
 Subject :Re:WAN/Internet to Mesh access, how does the routing work?.. 2015-05-19- 14:15:25 
N8JJ
Member
Joined: 2014-07-23- 14:46:49
Posts: 15
Location: Beavercreek, Ohio
Forum : General
Topic : WAN/Internet to Mesh access, how does the routing work?

I am noticing that when I enable WAN access, the mesh also has access to my LAN.

Isn't the a security and routing issue.  Multiple nodes could be using 192.168.0.x for example and create a IP conflict.

IP Logged
 Subject :Re:N1MM Plus over BBHN.. 2015-05-19- 09:25:31 
k5dlq
Member
Joined: 2012-05-11- 08:05:13
Posts: 233
Location: Magnolia, TX USA
 
Forum : Problems & Answers
Topic : N1MM Plus over BBHN

Glad you and Joe got it figured out.  Great news.

IP Logged
Darryl - K5DLQ
www.aredn.org
 Subject :Re:N1MM Plus over BBHN.. 2015-05-19- 04:04:59 
AJ4TW
Member
Joined: 2013-06-25- 11:52:38
Posts: 11
Location
Forum : Problems & Answers
Topic : N1MM Plus over BBHN

Thanks to AE6XE, it's all sorted out.  


For those who will be attempting this soon as FD approaches.

In N1MM go to:

Network Status>Actions>Edit Computer Addresses

Enter the name of the computer and the IP address it has on the LAN of the node that it is on.

Give it a few seconds to resynch and all should be good to go.


Thank you to all who helped.  It was a little easier than I was trying to make it.  ;-)



IP Logged
 Subject :Re:Ham-Com ?.. 2015-05-19- 02:29:48 
K5KTF
Admin
Joined: 2010-01-18- 23:04:04
Posts: 266
Location: 5' from this webserver
  
Forum : General
Topic : Ham-Com ?

Youbetcha!

Glenn KD5MFW will be giving his update on the project, and Im sure someone else will be doing an Intro talk (usually kip, but he may miss it this year).

And we will have a table where you can come chat with us.

73

Jim K5KTF (room reservations already made)


IP Logged
B-) Jim K5KTF EM10bm Cedar Park, TX :star:
 Subject :Ham-Com ?.. 2015-05-18- 20:18:42 
KB5ILY
Member
Joined: 2013-02-13- 14:44:46
Posts: 4
Location: Arkadelphia, AR - EM34
 
Forum : General
Topic : Ham-Com ?

Are there any BBHN discussions, demonstrations planned or booths recommended to visit during Ham-Com ?


IP Logged
--
73 de Travis KB5ILY (QCWA) / GROL (PG00041468)

 Subject :Re:Help with DNS/NTP server add on... 2015-05-18- 16:38:38 
W4GHV
Member
Joined: 2014-06-13- 10:06:08
Posts: 9
Location: near Harrisburg, NC
Forum : General
Topic : Help with DNS/NTP server add on.

I conquered the d*** thing! :) Got "Windows file sharing" done the hard way. Set up folder to be shared, and connected to \\10.x.x.x\file share. Locked in the dhcp addresses & Mac addresses of the computers. Now to sit back and see what I've actually done. There is a 40 second delay on log updates. Still lots to learn.
IP Logged
Ham since '54
Retired USAF
Retired electrical engineer
Retired college professor
Retired everything!
Interests: Arduino, quadcopters, ham radio
 Subject :Re:Help with DNS/NTP server add on... 2015-05-18- 16:38:30 
W4GHV
Member
Joined: 2014-06-13- 10:06:08
Posts: 9
Location: near Harrisburg, NC
Forum : General
Topic : Help with DNS/NTP server add on.

I conquered the d*** thing! :) Got "Windows file sharing" done the hard way. Set up folder to be shared, and connected to \\10.x.x.x\file share. Locked in the dhcp addresses & Mac addresses of the computers. Now to sit back and see what I've actually done. There is a 40 second delay on log updates. Still lots to learn.
IP Logged
Ham since '54
Retired USAF
Retired electrical engineer
Retired college professor
Retired everything!
Interests: Arduino, quadcopters, ham radio
 Subject :Re:N1MM Plus over BBHN.. 2015-05-18- 14:31:55 
AJ4TW
Member
Joined: 2013-06-25- 11:52:38
Posts: 11
Location
Forum : Problems & Answers
Topic : N1MM Plus over BBHN

It works when both laptops are plugged into the same node.

IP Logged
 Subject :Re:N1MM Plus over BBHN.. 2015-05-18- 14:10:30 
AJ4TW
Member
Joined: 2013-06-25- 11:52:38
Posts: 11
Location
Forum : Problems & Answers
Topic : N1MM Plus over BBHN


IP Logged
 Subject :Re:N1MM Plus over BBHN.. 2015-05-18- 14:00:55 
AJ4TW
Member
Joined: 2013-06-25- 11:52:38
Posts: 11
Location
Forum : Problems & Answers
Topic : N1MM Plus over BBHN

I tested over my home wifi with the same two computers and everything worked just fine. they got 192.168.0.x addresses from my WLAN DHCP and instantly saw each other and shared files. I then disabled the WLAN adapter in the laptops and connected a node to each laptop and got nothing. I'll try again and see what I can do. I may take some screenshots of the config and you guys may hopefully be able to tell me where I've gone wrong.
IP Logged
 Subject :Re:N1MM Plus over BBHN.. 2015-05-18- 13:54:21 
NG5V
Admin
Joined: 2010-01-18- 23:06:23
Posts: 43
Location
Forum : Problems & Answers
Topic : N1MM Plus over BBHN

The primary mode (and the default) is the direct lan mode. If you set up the nat mode, you have to determine all the ports, forward the ports and manage any changes that may occur because of differning subnets. The direct mode gives your LAN issued DHCP addresses a 10.x.x.x on the logging computer with a subnet containing all mesh addresses. Only those users in the NAT mode are restricted by the the above issues. Direct mode places every logging workstation on the same LAN in the same subnet. Most importantly, if your application won't work with the member computers plugged into the same wired router (test as wired network, not a mesh) it won't work over the mesh either.
IP Logged
 Subject :Re:VTUN Tunneling.. 2015-05-18- 12:40:50 
AB9U
Member
Joined: 2012-03-06- 08:19:44
Posts: 39
Location: Cottonwood, AZ
 
Forum : Problems & Answers
Topic : VTUN Tunneling

Also, do you lose DHCP capability in adding additional connections on both router lan ports?
IP Logged
de Wil - AB9U
 Subject :Re:VTUN Tunneling.. 2015-05-18- 12:14:35 
AB9U
Member
Joined: 2012-03-06- 08:19:44
Posts: 39
Location: Cottonwood, AZ
 
Forum : Problems & Answers
Topic : VTUN Tunneling

Does an orange crossover cable also work?
IP Logged
de Wil - AB9U
 Subject :Re:Error uploading SSH keys.. 2015-05-18- 12:07:18 
KE8AVJ
Member
Joined: 2015-04-08- 12:09:35
Posts: 30
Location: Saginaw, MI USA
Forum : Problems & Answers
Topic : Error uploading SSH keys

Correct. I am NOT uploading the file that ends in .ppk. Does the public key need the .pub extension? I have tried it with and without the .pub extension but get the same result. Thanks
IP Logged
4 nodes. One GL, one Bullet, one AirGrid and one Raspberry Pi node. RasPBX and web server setup on another Raspberry Pi.

Club page: www.k8dac.com
 Subject :Re:N1MM Plus over BBHN.. 2015-05-18- 11:06:08 
k5dlq
Member
Joined: 2012-05-11- 08:05:13
Posts: 233
Location: Magnolia, TX USA
 
Forum : Problems & Answers
Topic : N1MM Plus over BBHN


IP Logged
Last Edited On: 2015-05-18- 11:14:59 By k5dlq for the Reason
Darryl - K5DLQ
www.aredn.org
 Subject :N1MM Plus over BBHN.. 2015-05-18- 10:11:29 
AJ4TW
Member
Joined: 2013-06-25- 11:52:38
Posts: 11
Location
Forum : Problems & Answers
Topic : N1MM Plus over BBHN

So, it looks like to me that the new N1MM+ does not work over BBHN.  N1MM+ wants to see all the stations on the same subnet, then uses some .NET Framework code to automatically connect them.  It works fine on a normal WLAN, but when I try and connect them through the mesh, obviously, no joy.  

Is there a work-around that anyone knows of?   I'd love to use BBHN at field day, we were planning to run some other services between the stations as well.  But it's looking like we're going to be running a lot of CAT5 around.


TIA,

Cameron

AJ4TW

IP Logged
Page #  «StartPrev61626364656667686970NextEnd»


Powered by ccBoard


SPONSORED AD: