Broadband-Hamnet™ Forum :: Applications
Board Index Latest Posts Welcome Guest   [Register]  [Login]
 Subject :Team Talk 4 Support.. 2014-02-05- 18:01:39 
N7FV
Member
Joined: 2012-06-01- 16:50:02
Posts: 7
Location: Utah

Hi all:

 I am trying to get Team Talk 4 up and running.  I have installed the server and client software and have configured the server.  

Question 1. Do I need to bind to a specific IP address?

               2. What do I need to do to log in to the server over the mesh?

               3. How do I advertise this as a service?

               4. Team Talk uses TCP and UDP ports 10333. How do I set that up?

I can login to the server on my laptop where it is installed by using localhost or my IP address or the name of my router  (N7FV-1)

What I cannot do is login from another laptop connected to the mesh.

All routers were re-flashed tonight with the latest firmware. 

I realize that I am asking to be spoon fed. I don't have an IT background and I am hoping that there is a more general tutorial out there that explains how all this works as the help document included in the firmware is still the same from HSMM-MESH, and now the options have changed but the help menus have not.

Thanks in advance

Cory

N7FV
IP Logged
 Subject :Re:Team Talk 4 Support.. 2014-02-08- 07:12:59 
AF7J
Member
Joined: 2013-10-08- 10:00:30
Posts: 8
Location: Ogden Utah
 
Hello Cory, Have you figured out your problem yet? I have Team Talk on my windows 7pro laptop as a client/server and another set up on a windows 7 home laptop as Client. And I am able to connect via Ip of Ethernet port Ip address of client/server. On the server Laptop I have had to leave windows firewall open some how the server on the windows 7 pro laptop the firewall settings are not set up right but it does work next step is to figure out what is causing the firewall issue.
IP Logged
 Subject :Re:Team Talk 4 Support.. 2014-02-08- 20:42:03 
AF7J
Member
Joined: 2013-10-08- 10:00:30
Posts: 8
Location: Ogden Utah
 
Hello Found out what was wrong it is the Windows 7 Fire wall, Team Talk inbound rules It needs to be set. Highlight Team Talk 4 under the windows Firewall with advanced Security In bound rules. then right click for Properties of Team Talk 4 under inbound rules then navigate to tab that says "Protocols and Ports" Under Protocol Type drop down box select TCP. then Protocol number select 6, then on section that says " Local Port" Select Specific Port, the under that put in 10333 I left remote ports as all ports then hit apply and ok checked to see if the client was still connected and was. Hope this helps out 73
IP Logged
Page # 


Powered by ccBoard


SPONSORED AD: