Broadband-Hamnet™ Forum :: Hardware
Welcome Guest   [Register]  [Login]
 Subject :Biquad build.. 2013-04-17- 16:02:50 
KF7MBK
Member
Joined: 2013-03-10- 23:37:37
Posts: 8
Location: Phoenix, AZ
 

I built a biquad using the data here http://martybugs.net/wireless/biquad/


This antenna was very impressive for it's size.

I added it to a dish.



This setup works quite well. Combined with a 2W amp on each end, was able to do a 9.6 mile link with another station that is using that 24dBi grid antenna with a 92% link quality.  The bare biquad actually was able to do the link as well. Don't have link quality data, but it showed up on the signal strength screen.






IP Logged
Page # 


Powered by ccBoard


SPONSORED AD: