Broadband-Hamnet™ Forum :: UBNT Firmware
Welcome Guest   [Register]  [Login]
 Subject :Password recovery on Ubiquiti Bullet M2HP.. 2015-01-17- 18:02:37 
n5mbm
Member
Joined: 2014-08-02- 20:59:51
Posts: 67
Location
 

I flashed and setup a node for a friend of mine using the v2 software.  When I went over to install it on the tower and get everything online, he couldn't remember the password he gave me...

I needed to upgrade the software to match everything around him which is now on Ver3!

I found the instructions for the LinkSys router and got that password fixed - but now I have his Bullet that I can't do anything with...

No password, no config or upgrade...  HELP!?!  :)

Anyone got any good ideas?  I have tried the instructions that worked on the LinkSys, and couldn't get the v2 software to reset.  I am stumped at this point...

Trying real hard to get all the local guys interested in this in Brenham, TX.!

Thanks!

Bill - N5MBM

IP Logged
 Subject :Re:Password recovery on Ubiquiti Bullet M2HP.. 2015-01-17- 22:54:00 
n5mbm
Member
Joined: 2014-08-02- 20:59:51
Posts: 67
Location
 

Thanks for the link...  I did the TFTP procedure and it worked!  I upgraded the unit and now it works like a charm...


I appreciate the help!


Bill - N5MBM

www.n5mbm.net <-- has all sorts of hamnet stuff online

IP Logged
 Subject :Re:Password recovery on Ubiquiti Bullet M2HP.. 2015-04-26- 17:12:15 
kc9gqr
Member
Joined: 2014-06-26- 18:20:39
Posts: 5
Location
Where do you find the TFTP proceedure?
IP Logged
 Subject :Re:Password recovery on Ubiquiti Bullet M2HP.. 2015-04-26- 17:19:27 
KF5JIM
Future Astronaut
Joined: 2013-07-17- 12:13:36
Posts: 250
Location: Nederland

You can find TFTP procedures though a google search. Search for "TFTP Firmware Ubiquiti," and click on the link titled "Firmware Recovery - Ubiquiti Wiki." It will take you here: http://wiki.ubnt.com/Firmware_Recovery

I hope this gets you pointed in the right direction! Let us know if you need any additional support.

IP Logged
My opinions and views expressed here are solely my own.
 Subject :Re:Password recovery on Ubiquiti Bullet M2HP.. 2015-04-26- 20:09:25 
AE5CA
Member
Joined: 2012-05-19- 21:52:33
Posts: 81
Location

I am glad that you able to get into your friends node.  A TFTP flash is almost as easy as uploading from the web interface.  

For the person who finds this thread in the future, I wanted to mention that there is a feature in the UBNT firmware to reset the password.

With the node powered up press the reset button, either on the device or the POE injector, for 5 seconds and the password is reset to hsmm.  Press the reset button for 15 seconds and the node will be reset to a just flashed state.

Hopefully this will help.

Clint, AE5CA

IP Logged
 Subject :Re:Password recovery on Ubiquiti Bullet M2HP.. 2016-03-05- 11:29:39 
WF8S
Member
Joined: 2013-11-05- 10:56:59
Posts: 19
Location

I have a Ubiqiti Bullet M2 and have followed the instructions here to reset the password and cannot get it to reset.

Held the reset button for 5 seconds which by the instructions should reset the password to "hsmm" but it doesn't.


I really need to get into this BUllet to use it at my work duties.


Any suggestions?


IP Logged
 Subject :Re:Password recovery on Ubiquiti Bullet M2HP.. 2016-03-05- 12:48:27 
WF8S
Member
Joined: 2013-11-05- 10:56:59
Posts: 19
Location

Nevermind as I was missing a step in my hurried state of mind...

IP Logged
 Subject :Re:Password recovery on Ubiquiti Bullet M2HP.. 2016-12-31- 13:59:36 
KB5LNC
Member
Joined: 2012-04-09- 20:28:15
Posts: 9
Location: Stafford, VA
 


IP Logged
Last Edited On: 2016-12-31- 14:00:37 By KB5LNC for the Reason
 Subject :Re:Password recovery on Ubiquiti Bullet M2HP.. 2016-12-31- 14:00:00 
KB5LNC
Member
Joined: 2012-04-09- 20:28:15
Posts: 9
Location: Stafford, VA
 

I have a Rocket M2 flashed with 1.1.2 and have tried every password I can think I may have used. 

I tried 5 seconds on the reset button on the device, but nothing seems to change.  Any ideas how the reset/recover the password for this device? 

I have it currently connected to a windows 10 machine...

Thanks,

Ron

IP Logged
 Subject :Re:Password recovery on Ubiquiti Bullet M2HP.. 2017-01-01- 21:49:15 
KB5LNC
Member
Joined: 2012-04-09- 20:28:15
Posts: 9
Location: Stafford, VA
 

Disregard, I figured out what it was and update two nodes.  

IP Logged
 Subject :Re:Password recovery on Ubiquiti Bullet M2HP.. 2017-01-01- 21:50:39 
KB5LNC
Member
Joined: 2012-04-09- 20:28:15
Posts: 9
Location: Stafford, VA
 

Disregard, I figured out what it was and updated two nodes.  

IP Logged
Page # 


Powered by ccBoard


SPONSORED AD: